Are you exhausted from your Hey Dude shoes being too loose? Want to learn how to tighten them up quickly and easily? Here’s what you need!
We understand that slipping off shoes can be annoying and embarrassing. We also know that it’s hard to find time to go to the store and get your shoes adjusted, especially in this busy world.
A properly tightened Hey Dude shoe ensures that the foot is properly supported and prevents blisters and other foot ailments caused by slipping or excessive movement.
But with this guide, you can skip the store and quickly and easily adjust your Hey Dude shoes yourself.
How to tighten hey dude shoes – Common Tightening Methods
Learning how to properly tighten the laces is key to ensuring a secure fit and comfort when wearing shoes.
Here are some effective techniques that can help you secure your shoes:
1. Reposition The Knot On The Laces
Repositioning the knot on the laces is a great way to tighten the fit of your shoes. To do this, you’ll need to first unlace the shoes completely.
When you have the laces completely undone, start from the top of the shoe and tie a knot in the center of the laces. This will help the laces stay in place and the knot will act as a stopper.
Then, lace the shoes back up, but instead of tying the laces at the end, tie them a few inches lower than you usually do. This will help to tighten the fit of the shoe.
2. Loop The Laces
Tighten your shoes in a jiffy with the looping laces method. Start by lacing your shoes up until the last two eyelets, then don’t go through them, instead, cross the laces over each other.
Take the left lace and bring it under the right one, then take the right lace and loop it over the left one.
3. Wear Socks
If you’re looking to make your shoes fit like a glove, donning socks could be the answer. Not only will they add a layer of cushioning and padding to your shoes, but thicker socks can help fill the space and make them fit snugly. So, next time you’re lacing up, don’t forget your socks.
4. Size Down
You may be able to get hey dude shoes tighter by sizing down. Trying on a smaller size may help you achieve a better fit and will help to ensure that your shoes stay secure on your feet.
However, keep in mind that sizing down too much may make your shoes uncomfortable or cause them to rub against your feet.
5. Machine Wash Warm
Washing your hey dude shoes in the washing machine will tighten their fit. Start by placing the shoes in a mesh bag or pillowcase.
Then, set the machine to a warm wash cycle and put the shoes in. After the cycle is finished, let the shoe air dry. The heat from the wash cycle should help to shrink the shoe fabric slightly, thereby tightening the fit.
Types of Hey Dude Shoes
Hey Dude shoes come in a variety of styles and offer unique tightening methods, as mentioned below, making them suitable for a range of activities and needs.
1. Lace-Up – They are the most common and traditional type of Hey Dude shoes, featuring laces that wrap around the foot and tie in the front. They are available in a variety of styles and sizes, and their fit can be adjusted by tightening or loosening the laces.
2. Slip-On – These boots are a popular alternative to laces. They offer an elasticized opening that stretches to fit the foot and can be taken on and off with ease. Some slip-on shoes can be tightened by pulling on the heel tab in the back.
3. The Wendy – It is designed for easy on and off wear. Its canvas upper is soft and lightweight, with an elastic gusset that makes it easy to slip your foot in. A simple elastic strap fastens around the back of your foot for a secure fit.
4. Stretch Shoes – Some Hey Dude shoes are designed with stretchable fabric so that they can fit a wide range of foot sizes. The fit can be adjusted by pulling the fabric tighter or looser.
5. Hook-and-Loop – They feature a single piece of hook-and-loop material that wraps around the foot and can be tightened or loosened by adjusting the length of the strap.
Tips For Proper Tightening Of Hey Dude Shoes
Having your Hey Dude shoes properly tightened can be key to preserving your feet’s health, support, and coziness. To make sure your boots fit just right, here are some helpful hints.
Sizing is an important factor in the tightening of Hey Dude shoes because the correct fit helps to ensure that the footwear holds the foot securely and snugly.
With these Hey Dude shoes, the sizes range from US 7 to US 15, and US 5 to US 12 for both men and women respectively. To achieve the correct size, you must measure the length of your foot and compare this to the size chart of the shoe.
A good fit should allow for about a quarter of an inch of space between the longest toe and the end of the boot. If the shoe is too tight, it can cause discomfort and even lead to injury. On the other hand, if the boot is too loose, it can cause slipping and instability.
Shoes that are too narrow can pinch the foot and cause discomfort, while those that are too wide can cause the foot to slide around inside the shoe.
Proper fit ensures that the boots fit snugly on the feet, providing enhanced comfort and stability. To ensure a proper fit, the footwear should be laced up tightly, adjusting the laces to contour to the shape of the foot.
The heel should be snug in the back of the shoe and the tongue of the shoe should be fastened to the top of the foot.
Plus, the laces should be tightened just to the point of not being too tight or too loose, allowing for natural movement and breathability of the foot.
Achieving the perfect balance of comfort and security is vital when tightening hey dude shoes. The main idea is to ensure that the laces are not too tight or too loose so that the foot can move comfortably. To achieve this, the laces should be adjusted to the desired tightness by “lacing up” the shoes.
This involves starting from the bottom and working up the foot, ensuring that the laces are tight enough to hold the foot securely in the shoe but not too tight so that the foot is restricted. If the laces are too tight, it can cause discomfort and even pain. The foot should be able to move freely in the shoe and be able to flex more naturally while walking. Plus the toe box should be spacious, giving your toes room to wiggle freely.
Troubleshooting For Hey Dude Shoes
Hey Dude Shoes offers a wide variety of shoes for men and women. However, if they are too tight or too loose, it is advisable to troubleshoot the issue as soon as possible as mentioned below:
Problem 1 – Shoes are causing blisters
Solution – According to Dr. Stuart James Fischer, MD, FAAOS, too tight shoes can cause blisters and other foot problems. So it is vital to break in the shoes before wearing them for a long period. Wear them around the house for a few hours each day and then increase the amount of time you wear them until they feel comfortable.
Additionally, you can apply a thin layer of petroleum jelly or anti-friction cream to the areas of the foot that are prone to blistering. This will help reduce friction and make the footwear more comfortable.
Problem 2 – Shoes are not breathable
Solution – Look for boots that are made from breathable materials such as mesh or leather. Plus, go for shoes that have vents or perforations on the upper to help promote air circulation.
You can purchase insoles that are designed to wick away moisture and keep your feet cool and dry if your footwear is not breathable.
Problem 3 – Boots are uncomfortable
Solution – To make the Hey Dude more comfortable, customers should invest in a pair of cushioned insoles. Shoe inserts provide extra support and cushioning to help relieve foot pain and discomfort. Weavers can also try wrapping the boots in a damp towel and then running a blow dryer over the shoes to stretch them out.
Problem 1 – Slip off the feet when walking
Solution – Hey Dude customers can find the perfect fit for their feet by using a shoe insert or an insole for added cushioning and arch support. Moreover, tightening the laces of the shoes helps secure the fit and prevent slipping. However, if the shoes still slip off, they should try a half-size smaller or a different style of shoe.
Problem 2 – Uncomfortable due to the looseness
Solution – The wearer should look for shoes that provide better cushioning, such as those with memory foam insoles or gel-filled midsoles. Furthermore, the user may want to consider using an insert to provide extra cushioning and arch support, which can help alleviate pain.
Problem 3 – Boots are causing blisters
Solution – As per a study done by the National Library of Medicine, too loose footwear can cause foot problems.
The remedy to this problem is to use a thicker sock to provide additional padding and reduce friction on the foot. Furthermore, using a quality anti-friction spray or lotion on the feet and inside the shoe can help reduce the risk of blisters.
Over To You!
The process of tightening HeyDude shoes may seem a bit overwhelming, but it doesn’t have to be. With just a few simple steps, you can make sure your footwear is secure and comfortable all day long.
Whether you use the Loop The Laces method or the alternative method, you can have confidence that your boots will stay tight and secure.
No matter how tight or lose the HeyDude is, you can always adjust them to fit your feet perfectly. Take your time when fitting your boots.
I’m Richard Gravener, founder and editor of Bootzine. I have 19 plus years as Safety Officer in the construction industry. I have been qualified as a Safety Inspector since December of 2000, and have been a Workplace Safety Coordinator/Advisor since September of 2008.
Workplace safety First – Therefore, it’s crucial for workers to have good footwear to protect their feet from different dangers at work! On this blog, I aim to share all my knowledge and expertise in dealing with workplace safety, especially in choosing the right footwear for different jobs and foot care, hopefully, you can get something out of it. Enjoy!